Teaching-In To The Homematic Ip Access Point - Homematic IP HmIP-FALMOT-C12 Installation Instructions And Operating Manual

• You can add the new floor heating actuator to
other devices such as the wall thermostat or the
Multi IO Box. Simply activate the pairing mode of
the floor heating actuator first and of the device
you want to pair afterwards. For further informa-
tion, please refer to the user manual of the corre-
sponding device.
6.4.4

Teaching-in to the Homematic IP Access Point

First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2/CCU3. For detailed information, please re-
fer to the Homematic IP User Guide, available for
download in the download area of www.eQ-3.de.
To teach-in your floor heating actuator to the Access
Point, please proceed as follows:
• Open the Homematic IP app on your smart-
phone.
Select the menu item "Teach-in device".
•
Briefly press the system button (A) until the LED
•
(A) quickly starts flashing orange (see figure 6).
Start-up
55