Homematic IP HmIP-FALMOT-C12 Installation Instructions And Operating Manual page 44

Hazard information
The actuator is part of the building installation.
The relevant national standards and directives
must be taken into consideration during planning
and set-up. Only qualified electricians (to VDE
0100) are permitted to carry out work on the 230
V mains. Applicable accident prevention regulati-
ons must be complied with while such work is
being carried out. To avoid electric shocks from
the device, please disconnect the mains voltage
(trip the miniature circuit-breaker). Non-compli-
ance with the installation instructions can cause
fire or introduce other hazards.
When connecting to the device terminals, take
the permissible cables and cable cross sections
into account.
The floor heating actuator may only be operated
in conjunction with motorised actuators (HmIP-
VDMOT).
The device may only be operated within residen-
tial buildings.
Using the device for any purpose other than that
described in this operating manual does not fall
within the scope of intended use and shall invali-
date any warranty or liability.
44