General System Information - Homematic IP HmIP-FALMOT-C12 Installation Instructions And Operating Manual

Cable bushings (see figure 2):
(K) Cable bushing for DC-IN
(L)
Cable bushing for DC-IN
(M)
Cable routing for motorised drives
(N) Cable routing for extension box
Unlike conventional thermal actuators, the mo-
torised actuator can move to any valve position
calculated by the floor heating actuator in order
to reach the desired room temperature. This re-
sults in an even heat flow and continuous heat
dissipation. When switching from conventional to
motorised actuators, flow noises may occur in
rare cases at the heating circuit distributor if the
pump pressure setting is high and the valve ope-
nings are small. You can correct this by changing
the pump settings or by adjusting the parameters
of the floor heating actuator.
4

General system information

This device is part of the Homematic IP smart home sys-
tem and works with the Homematic IP radio protocol. All
devices of the system can be configured comfortably and
individually with the Homematic IP smartphone app. Al-
ternatively, you can operate the Homematic IP devices
via the Central Control Unit CCU2/CCU3 or in connec-
tion with various partner solutions. The available func-
General system information
47