Lubrication Gearbox - Tiger FLX10 Operator's Manual

2.3 Lubrication
Gearboxes
Gearboxes
1.
Replace oil in gearboxes after the first 50 hours of operation then yearly.
Check gearbox oil level frequently. Steady loss of oil will indicate damaged seals, which should be
replaced immediately to prevent ruining the gearbox.
Procedure for refilling of gearboxes:
-A dip stick is provided on the vent plug. Fill until oil shows on the dipstick. Do not screw
dipstick in when checking oil level.
DIP STICK
FILL LINE
-Use of an oil/grease pump to suck oil out of the gearbox is recommended to minimize
spilled oil and to provide for more complete removal of old oil.
2. Gear case oil should meet the following specifications:
-API Service Classifications GL-5
-Military Specification MIL-L-2105C
Consult the following chart for the oil viscosity recommendations:
FLX15/10 04/06
© 2006 Alamo Group Inc.
MAINTENANCE
WHEN FILLING RIGHT ANGLE DRIVES
WARNING!
ALLOW APPROX. 15 MIN. FOR OIL TO
SETTLE INTO BOTTOM CAVITY BEFORE
CHECKING DIPSTICK.
NOTE: Use SAE 80-90Gear Oil
Maintenance Section 5-5