Tiger FLX10 Operator's Manual page 42

ASSEMBLY
9. Connecting the Hoses to Breakaway Stand and Connecting the Selector
Valve for 10' Models
Connect the cutter hoses to the hydraulic breakaway
stand. The hoses are color coded to identify their
location. Never leave a disconnected hose end open
always keep them capped and clean from contamination.
Connect the driveline that was supplied with the Flex
Arm and lower the PTO support.
IMPORTANT: Before operation remove the 3/4" bolts
to unlock the castor wheels. To allow them to move
freely.
Breakaway
Stand
The selector valve kit reduces the required tractor ports and provides double acting wing lift action.
DANGER! Use wing lock up pin to secure wing or lower rotary cutter to the ground before
attempting to connect the selector valve
FLX15/10 04/06
Assembly Section 3-8
© 2006 Alamo Group Inc.