Table of Contents
Advertisement
5 Place your fingers on the daughter card directly over the middle of the
beige connector and press down to fasten the connectors together
(Figure 6). A click is heard when the connectors engage.
Figure 6 Fastening the Beige Connectors
6 Insert the following screw and washer combination in the two holes on
the daughter card (Figure 7):
a 1 flat washer
b 1 spring washer
c 1 roundhead phillips screw
7 Repeat the operation for the second hole. Spare screws and washers are
provided in the tool kit.
Figure 7 Replacing the Screws and Washers
click
13
Advertisement
Table of Contents
Need help?
Do you have a question about the CoreBuilder 9000 ATM Interface Module and is the answer not in the manual?
Questions and answers