Table of Contents
Advertisement
12
ATM I
M
NTERFACE
ODULE
Q
S
G
UICK
TART
UIDE
2 Insert the protective plugs into the left cutout from the back of the ATM
Interface Carrier Module (Figure 5) until the 3 front holes of the daughter
card are aligned with the 3 holes in the faceplate of the ATM Carrier
Module.
Figure 5 Inserting the OC-3/STM-1 Card into the Cutouts
3 Lower the OC-3/STM-1 card until the card rests on the spacers,
4 Look from the side of the ATM Interface Carrier Module and align the
beige connector of the ATM Interface Carrier Module with the beige
connector of the OC-3/STM-1 card.
Advertisement
Table of Contents
Need help?
Do you have a question about the CoreBuilder 9000 ATM Interface Module and is the answer not in the manual?
Questions and answers