A - Enclosure panel
B - Upper and lower gasket
2.
Push the overlapped part of the gasket and make a flat surface.
Make sure that there are no gaps between the gaskets.
A - Upper and lower gasket
◆ Installation Procedure
■
Install the Drive (Procedure A)
Cut an opening in the enclosure panel before you install the attachment. Refer to
Type 12 Heatsink External Mounting) on page 18
YASKAWA TOEPC71061779B GA800 Drive Installation Manual
C - Left and right gasket
Figure 3.13 Install the Gasket
B - Left and right gasket
Figure 3.14
for more information.
3 Mechanical Installation
Panel Cut-Out Dimensions (IP55/UL
23