YASKAWA GA800 Series Installation Manual page 37

2.
Align the notches on the fan with the pins on the drive and install the cooling fan in the drive.
A - Notch on fan
B - Alignment pins on drive
Note:
When you install the cooling fan, make sure that you do not pinch cables between the cooling fan and the drive.
3.
Put the cable in the recess of the drive.
A - Front of drive
4.
Insert the fan finger guard straight until the hook clicks into place.
5.
Energize the drive and set o4-03 = 0 [Fan Operation Time Setting = 0 h] to reset the cooling fan operation
time.
YASKAWA TOEPC71061779B GA800 Drive Installation Manual
C - Front of drive
Figure 4.17 Install the Cooling Fans
Figure 4.18 Put the Cable in the Drive Recess
Figure 4.19 Reattach the Fan Finger Guard
4 Maintenance
37