Remove a Fan
1.
Remove the drive cover.
CAUTION
the terminal cover can fall and cause moderate injury.
2.
Unplug the fan cables from the fan connectors.
A - Fan unit
B - Fan connector
3.
Loosen the fan unit screws.
Note:
To remove the fan unit, it is only necessary to loosen the Screws B.
Remove screws A.
A - Screws A
YASKAWA TOEPC71061779B GA800 Drive Installation Manual
Crush Hazard. Loosen the cover screws. Do not fully remove them. If you fully remove the cover screws,
Figure 4.62 Components
Figure 4.63 Loosen the Screws
C - Fan cable
B - Screws B
4 Maintenance
59