1.
Remove the shipping attachment from the top of the drive.
A - Shipping attachment
2.
Remove the shipping attachment from the bottom of the drive.
A - Shipping attachment
3.
Install the drive in the cut opening of the enclosure panel and use screws to safety it to the enclosure panel.
Tighten the screws to a correct tightening torque:
• M6 screws: 3.92 N∙m to 4.90 N∙m (34.70 in∙lb to 43.37 in∙lb)
A - Enclosure panel
B - Gasket
4.
Use screws to safety the panel supports.
Tighten the screws to a correct tightening torque:
• M5 screws: 1.96 N∙m to 2.53 N∙m (17.35 in∙lb to 22.39 in∙lb)
YASKAWA TOEPC71061779B GA800 Drive Installation Manual
Figure 3.16 Remove the Shipping Attachment
Figure 3.17 Remove the Shipping Attachment
Figure 3.18 Install the Drive into the Opening of the Enclosure Panel
C - M6 screws
3 Mechanical Installation
25