Table of Contents
Advertisement
C D
p l a y b a c k
Programmed CD tracks playback
Repeat playback
Random playback
11
1. Stop the disc.
2. Select the programme function.
3. Choose a disc.
4. Select a track number to be
programmed.
5. Store this number in the
programme.
Up to 30 tracks can be programmed by repeating steps 3 to 5.
DISC CHANGE button has no effect during programming.
Play your programme.
Search and skip function as normal
during CD programme playback.
Stop Playback.
To cancel the CD programm, press the
button twice.
Press repeatedly...
to repeat the current track,
to repeat the current disc,
to repeat all discs.
To cancel repeat playback, press the button until "REPEAT"
disappears from the display .
A programme
or a track
can be repeated during
programme playback.
Select the random function, press
repeatedly ...
to play tracks of the current
disc in a random order.
to play tracks from disc 1, 2,
and 3 in a random order
To cancel random playback, press the button until "RANDOM " disappears
from the display .
Discs recorded by personal computer or high speed recording may not be played (or cause
noise) according to the recordings format.
It is recommended to use and play discs recorded at as low speed as possible.
TAPE 1: Will only playback prerecorded tapes.
TAPE 2: To play back prerecorded tapes
and to record tapes.
Tape playback
Select TAPE 1 or TAPE 2 function.
Open either tape compartment to load the tape.
Be sure to have the open part of the cassette downward and the left
on the main unit
hand spool fully wound.
Close the compartment door again, pushing it gently.
Start playback.
Tape 2 : Press / according to the direction to playback
Stop playback.
Winding
Stop playback.
Fast rewind or forward the tape.
Skipping a piece (Fast forward/rewind during playback)
During playback.
Fast rewind to beginning of the current piece of music or
advance to the next piece.
Press to resume playback.
Continuous play back
Select the TAPE 2 function.
Load tapes into both compartments.
Press until
on the main unit
Play TAPE 2.
After playing both sides of TAPE 2, then the unit will
commence with TAPE 1 (one side).
PLAY MODE : Select if the machine is to play TAPE 2 in one direction"
or repeatedly "
" using MODE button on the machine.
The tape counter resets to "0000" when a tape compartment is opened ("0000" is not necessarily the
beginning of the tape).
T
A
P
p l a y b a c k
the tape.
is shown in display.
", both directions "
",
E
12
Advertisement
Table of Contents
