Siemens SIMOTION Series Commissioning And Hardware Installation Manual page 68

Description
3.3 HMI and SIMOTION SCOUT
7. The selected Network Adapter is shown in the following dialog box.
Click Next to confirm and install.
Figure 3-14
8. After finishing the installation, the following dialog box is displayed.
Exit the wizard with Finish.
Figure 3-15
68
Add Hardware - Selected Network Adapter can be installed
Add Hardware - Installation of the Microsoft Loopback Adapter is finished
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016