Siemens SIMOTION Series Commissioning And Hardware Installation Manual page 108

Connection
6.5 Connecting PROFIBUS
Procedure
To connect the IsoPROFIBUS board, proceed as follows:
1. Unlock the cover by pushing the latches in the direction of the arrow;
swivel the released cover in the direction of the arrow and remove it. The interfaces for the
optional IsoPROFIBUS board are then free.
2. Connect the IsoPROFIBUS board to the slots shown.
108
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016