3.3.5
HMI or ES via IsoPROFIBUS (optional)
Networking via PROFIBUS DP
If you connect a central HMI via PROFIBUS DP, the X101 and X102 interfaces of the
IsoPROFIBUS board are available.
Figure 3-23
References
You can find further information on the HMI in the documentation:
● SIMOTION Runtime Basic Functions, section HMI (Human Machine Interface) coupling.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016
Model: Networking via PROFIBUS DP
Description
3.3 HMI and SIMOTION SCOUT
75