Troubleshooting/Faqs; Error Correction - Siemens SIMOTION Series Commissioning And Hardware Installation Manual

Hide thumbs Also See for SIMOTION Series:
Table of Contents

Advertisement

Troubleshooting/FAQs

13.1

Error correction

This section provides you with tips on how to locate and troubleshoot common problems.
FAQs / error correction
The device is not operation‐
al.
SIMOTION P does not start
after connecting the CFast
card.
SIMOTION P does not start
after a reboot.
The monitor remains dark.
The mouse pointer does not
appear on the screen.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016
Possible cause
There is no power supply to
the device.
BIOS settings are not set to
Hotplug Enabled.
The user is not logged in au‐
tomatically.
The monitor is switched off.
The monitor is in "power‐
save" mode.
The brightness button has
been set to dark.
The power cord or the mon‐
itor cable is not connected.
The mouse driver is not loa‐
ded.
The mouse is not connec‐
ted.
Possible remedy
● Check whether the 24 VDC power supply is connected.
See SIMOTION P320-4 E / P320-4 S Manual, Section
Connecting the power supply (24 VDC).
● Check whether the line side switch is activated.
See SIMOTION P320-4 E / P320-4 S Manual, Section
Operator controls.
You can find out how to check and correct the BIOS settings in
Section Hotplug Enabled BIOS settings (Page 203).
Set the password for the AutoLogin (Automatically Log On).
See Section SIMOTION P AutoLogin (Page 91).
Switch on the monitor.
Press any key on the connected keyboard.
Set the monitor brightness button to obtain more light.
For detailed information, refer to the monitor operating instruc‐
tions.
● Check whether the power cord has been properly connected
to the monitor and to the system unit or to the grounded
shockproof outlet.
● Check whether the monitor cable has been properly
connected to the system unit and to the monitor.
If the monitor screen still remains dark after you have performed
these checks, please contact your technical support team.
Check whether the mouse driver is properly installed and
present when you start the application program.
For more detailed information on the mouse driver, refer to the
documentation for the mouse or application programs.
Check whether the mouse is properly connected to the system
unit. If you use an adapter or extension on the mouse cable,
also check the connectors.
If the cursor still does not appear on the screen after you have
performed these checks and measures, please contact your
technical support team.
13
201

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simotion p320-4 sSimotion p320-4 e

Table of Contents