Siemens SIMOTION Series Commissioning And Hardware Installation Manual page 58

Description
3.2 SIMOTION P320-4 product description
Distributed I/O systems (PROFINET)
Table 3-1
Component
SIMATIC ET 200M
SIMATIC ET 200S
SIMATIC ET 200SP
SIMATIC ET 200MP
SIMATIC ET 200eco
SIMATIC ET 200pro
Note
Note that not all modules of the above-mentioned I/Os or I/O systems have been released for
SIMOTION.
There may also be system-dependent functional differences with regard to the use on
SIMOTION and on SIMATIC.
For example, special process-control functions (e.g. HART modules, etc.) are not supported
by SIMOTION for the ET 200M distributed I/O system.
For a detailed and routinely updated list of I/O modules enabled with SIMOTION as well as
application information, visit us online at:
SIEMENS Industry Online Support - Product support - Supplementary system components
(https://support.industry.siemens.com/cs/de/en/view/11886029)
Further modules are integrated via the GSD file of the device's manufacturer.
Note
Note that in individual cases, additional supplementary conditions must be fulfilled.
Drive systems (via PROFINET IO)
Table 3-2
Component
SINAMICS S120
58
Components for distributed I/O
Function
Modular I/O system for cabinet installation and high channel densities.
Finely modular I/O system for cabinet installation including motor starters,
safety technology, and individual grouping of the load groups.
Finely scalable I/O system for cabinet installation; SIMATIC ET 200SP fea‐
tures a single-cable and multi-cable connection with push-in terminals, com‐
pact dimensions, high performance, and low part variety.
Modular I/O system for cabinet installation and high channel densities in the
SIMATIC S7‑1500 packaging system.
SIMATIC ET 200MP permits the shortest bus cycle times and fastest re‐
sponse time even with large volumes of data.
I/O system with IP67 degree of protection for machine-related, cabinet-free
applications, featuring a flexible and fast connection system in ECOFAST or
M12.
Modular I/O system with IP65/67 degree of protection for machine-related,
cabinet-free applications, including motor starters.
List of typically connected drive systems
Function
Servo drives, innovative single-axis and multi-axis solution
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016