Supporting Tubes With Air-Termination Tip/Rod - dehn HVI Installation Instructions Manual

4.4

Supporting tubes with air-termination tip/rod

One EB spring element for the sealing end is already integrated in the supporting tubes where the HVI
long Conductor is installed. The adapter required for the version with air-termination tip (Ø 10 mm) is
already pre-assembled in the head of the supporting tube. The head of the supporting tube is mecha-
nically closed and thus water-proof.
Table 9 Supporting tubes
Part No. Material
105 330
GRP/Al
105 314 GRP/StSt
105 325 GRP/Al
105 336 GRP/StSt
105 331 GRP/Al
105 315 GRP/StSt
105 326 GRP/Al
105 337 GRP/StSt
105 332 GRP/Al
105 316
GRP/StSt
105 327
GRP/Al
105 338 GRP/StSt
105 333 GRP/Al
105 317 GRP/StSt
105 328 GRP/Al
105 339 GRP/StSt
Mounting set Com-
consisting of ponent
length
Supporting
tube
3.2 m
Supporting tube
with side outlet
Supporting
tube
3.2 m
Supporting tube
with side outlet
Supporting
tube
4.7 m
Supporting tube
with side outlet
Supporting
tube
4.7 m
Supporting tube
with side outlet
Air-termina- Total
tion tip/rod length
Ø 10 mm
4.2 m
Length:
1.00 m
Ø 22/16/10 mm
5.7 m
Length: 2.5 m
Ø 10 mm
5.7 m
Length: 1.00 m
Ø 22/16/10 mm
7.2 m
Length: 2.5 m
19