C-Lever Es1 Variant; Short Plate Variant - Kaba c-lever 2662-K5 Installation Manual

Installation
4.3.3

c-lever ES1 variant

4.3.4

Short plate variant

26
Continuation of chapter Fastening the coupling unit.
Procedure:
4. Guide the antenna cable (13) at the top through the
wide opening of the steel support plate.
5. Place a spacer (37) on the top threaded pin.
6. Place a spacer (38) on the bottom threaded pin.
7. Insert the steel support plate into the outside shield.
8. Secure the steel support plate to the outside shield
using four fixing screws (39).
Continuation of chapter Fastening the coupling unit.
Procedure:
4. Guide the antenna cable (13) on the left next to the
coupling unit in the outside shield as shown.
k2evo702 - 201610
Installation Manual
37 13
38
39
13
Kaba c-lever and variants