Installation Manual
4.3.5
Rosette assembly variant
Kaba c-lever and variants
5.
Guide the antenna cable (13) through the cylinder
opening of the support plate for the outside shield
(40).
6.
Insert the support plate for the outside shield into
the outside shield.
7.
Secure the support plate for the outside shield into
the outside shield using two fixing screws (42).
Continuation of chapter Fastening the coupling unit.
Procedure:
4.
Guide the antenna cable (13) on the left next to the
coupling unit in the outside shield as shown.
5.
Guide the antenna cable (13) through the wide
opening of the support plate for the outside shield
(41).
6.
Insert the support plate for the outside shield into
the outside shield.
7.
Secure the support plate for the outside shield into
the outside shield using two fixing screws (43).
k2evo702 - 201610
Installation
40
13
42
13
41
13
43
27