Blinking Red Errors - Circutor Wallbox eNext Series Instruction Manual

A

Blinking red errors

No of
Error
blinks
3 Low voltage
Electric
5
protection
6 Current leak
11 Connector lock
12 Welded contact
14 Damaged cable
15 Negative PWM
16 E Status
17 D Status
M a i n t e n a n c e
18
required (Relays)
44
Description
No voltage detected in
the power circuit.
The electric protections
of the unit are tripped.
A current leakage has
been detected.
The connector lock has
failed.
An internal short circuit
has been detected.
The cable plugged to
the Charge point is
damaged.
Invalid communication
response from the EV.
Communication error
between the vehicle
and the equipment.
Ventilation system is
needed because of EV
request.
Some internal com-
ponents need mainte-
nance.
Wallbox eNext
Solution
Make sure all protections are
armed.
Rearm the protections. If you
have any question, contact
technical support
Rearm the protections. If you
have any question, contact
technical support.
Try repeating the operation.
If the error persists, contact
technical support.
Unplug the vehicle, restart
the unit and try again. If the
error persists, contact tech-
nical support.
Try using another cable. If
the error persists, contact
technical support.
Unplug the cable and wait
until the LED beacons turn
green to plug it again. If the
error persists, contact tech-
nical support.
Try using another cable. If
the error persists, contact
technical support.
Please contact technical
support.
Please contact technical
support.
Instruction manual