Related Manuals for REMKO AT 25
Summary of Contents for REMKO AT 25
- Page 1 REMKO AT 25 Automatic oil heater Operation Technology Spare Parts REMKO - powerful like a bear. Edition GB – M04...
-
Page 3: Table Of Contents
Our guarantee will become void when the unit supplied by us is used and installed for inadequate purposes, or maintained incorrectly, etc., or if it is changed without our prior consent. Subject to alterations! Automatic oil heater REMKO AT 25 Contents Contents Page Page... -
Page 4: Safety Instructions
Safety Instructions Description of Device Please make sure that the relevant local building The unit is fired directly with heating oil EL or diesel and can be operated with or without an exhaust-gas connec- and fire protection codes as well as the regulations tion. -
Page 5: Provision Of Air Heaters
Safety temperature limiter (STB) The safety temperature limiter (STB) interrupts the openings which are not lockable are present in the burner operation in the event of overheating and locks region of ceiling and floor for the air supply and for out going air and the size of these openings in m²... -
Page 6: Installation Instructions
Installation Instructions Exhaust system In the outdoors or in open rooms, the operation of the The units are generally to be operated in accordance device is also possible without an exhaust system. with the safety rules, the building code of the land con- cerned and the fire protection code. -
Page 7: Starting
Starting Prior to starting, the unit is to be checked to make sure Heating without room thermostat that there are no visible defects on the control and The unit runs in continuous operation. safety devices, that the unit has been installed correctly and that it has been properly connected to the mains. -
Page 8: Maintenance And Service
Maintenance and Service Cleaning the fuel tank The unit is to be maintained regularly whereby some fundamental rules are to be observed to ensure a long It is necessary to clean the fuel tank: service life and trouble-free operation. ◊ After each heating period or, depending on the After each heating period or even earlier, depending on deployment conditions, even earlier. -
Page 9: Exhaust Measurement
“guarantee certificate” which is enclosed with every REMKO-heater and has returned it 3. Tighten the safety screw again. to REMKO GmbH & Co. KG in due time after the unit’s sale and commissioning. The units are factory tested on faultless function. If any... -
Page 10: Fuel Pump
Fuel Pump Technical Data Model AT 25 The standard type of the pump runs in a system of 1 pipe. The required fuel is sucked in through the suction Nominal heat output max. line "S". Nominal heat output 22,5 Air output m³/h... -
Page 11: Troubleshooting
Troubleshooting Trouble: Cause: – 2 – 3 – 4 – 6 – 7 – 8 – 25 unit does not start. – fan 1 – 5 – 9 – 10 – 11 – 12 – 13 – 14 – 15 – 16 – 17 motor is running but burner will not be ignited. -
Page 12: Exploded View
Exploded View Fig. A See fig. A See fig. B Fig. B We reserve the right to make modifications in dimensions and construction in the interests of technical progress. -
Page 13: Spare Part List
Spare Part List Description Ref-No. Ref-No. Description inspection cover 1103701 thermostat socket 1101018 exhaust connection 1103702 bridge circuit plug 1101019 inspection cover 1103703 protective socket, big 1101615 capacitor 1102907 gasket (inspection cover) 1103705 connection cable (solenoid valve) 1102825 combustion chamber 1103704 hose connection fitting 1102109... -
Page 14: Maintenance Log
Maintenance Log Model : ........ Model No. : ........9 10 11 12 13 14 15 16 17 18 19 20 Clean unit -surface- Clean unit -interior- Clean fan Clean combustion chamber Clean burner head Adjust ignition electrode Replace nozzle Clean / replace fuel filter Adjust / measuring burner Check safety facility... - Page 16 REMKO GmbH & Co. KG Klima- und Wärmetechnik D-32791 Lage Im Seelenkamp 12 • D-32777 Lage PO Box 1827 • Phone +49 (5232) 606 - 0 +49 (5232) 606260...