Table of Contents
Advertisement
Motion
■ Trigger by GPIO
GPIO
3.7.3 Snapshot Tab
The Snapshot tabbed pane sets the camera to take snapshot images when motion is detected.
The four methods available for selection are Always, Schedule, Motion, and GPIO, each of which
can be set up with user scheduled recording time and duration, as well as defining the video
record file target destination.
■ Trigger by Always
5 Mega-pixel PoE / Wireless Fish-Eye IP Camera
This method will trigger the camera video surveillance/recording
operation according to the set duration (in seconds) whenever motion is
detected within the defined days of the week and at the time of the set
days. The video record may be sent to host by e-mail or stored in the
SD card as selected.
On the defined days of the week and at certain time of the set days, the
Camera will trigger its GPIO Input Signal when its state changes.
Recording duration can be set in seconds and the video record may be
provided to host by e-mail/FTP, stored in the SD card, activated GPIO
Output Port or through all of them.
54
ICA-8500/ICA-W8500
Advertisement
Table of Contents
