Table of Contents
Advertisement
Defining multiple motion detection areas:
■
Step 1. After satisfactory positioning of the first detection area as described above, click the Add
button again. A second default frame will pop-up on the screen. Drag and resize the frame at the
desired location.
Step 2. Repeat the above step to add more detection area frames.
Total defined motion detection areas cannot exceed 10 frames.
Step 3. To assign unique names to each framed location for easy identification, click on the frame
and a Window Name text box with the default name of the selected frame, will appear at the
bottom of the pane (see figure below). Enter a new name and click the Save button. Wait for a
while for the change to take effect.
Step 4. To delete a frame that is no longer needed but was previously saved, click on the
unwanted frame and click Delete button. The frame will disappear after a while.
Step 5. To delete multiple frames that are not yet saved, directly click the Refresh button instead
of deleting them individually. The Refresh button will automatically clear all unsaved frames.
3.7.2 Video Tab
The Video tabbed pane sets the video recording trigger method to use when motion is detected by
the Camera. The four methods available for selection are Period, Schedule, Motion, and GPIO,
each of which can be set up with user scheduled recording time and duration, as well as defining
the video record file target destination.
Only the ICA-8500/W8500 enables Motion/PIR to trigger video recording and bind
into CloudLync Cloud Service with Google account. The recorded video files in the
SD Memory Card will be uploaded and backed-up to your Google Drive
synchronously.
■ Trigger by Period
5 Mega-pixel PoE / Wireless Fish-Eye IP Camera
52
ICA-8500/ICA-W8500
Advertisement
Table of Contents
