IBM Power Systems 9009-41A Manual page 78
System backplane
Hide thumbs
Also See for Power Systems 9009-41A:
- Manual (194 pages) ,
- Site and hardware planning (164 pages) ,
- Instructions manual (32 pages)
Table of Contents
Advertisement
Figure 62. Removing a memory module or filler
b) Hold the memory module or filler by the edges and pull it out of the system. Note the location
from which you are removing the memory module.
c) Identify the corresponding location on the new system backplane and ensure that the locking tabs
are open. See the following figure.
64 Power Systems: System backplane
Advertisement
Table of Contents
