IBM Power Systems 9009-41A Manual page 44
System backplane
Hide thumbs
Also See for Power Systems 9009-41A:
- Manual (194 pages) ,
- Site and hardware planning (164 pages) ,
- Instructions manual (32 pages)
Table of Contents
Advertisement
Figure 27. Disconnecting the rear SAS cables from the SAS RAID internal adapter
e) If a rear SAS cable is attached to the SAS RAID adapter, unlatch the PCI retainer (A) for the PCI
adapter slot P1-C6 at the rear of the system. Then, lift and remove the rear SAS cable adapter (B).
See the following figure.
Ensure that the rear SAS cable does not catch on any components while you are lifting the rear
SAS adapter out of the slot.
30 Power Systems: System backplane
Advertisement
Table of Contents
