IBM Power Systems 9009-41A Manual page 64
System backplane
Hide thumbs
Also See for Power Systems 9009-41A:
- Manual (194 pages) ,
- Site and hardware planning (164 pages) ,
- Instructions manual (32 pages)
Table of Contents
Advertisement
Figure 47. Disconnecting the control panel display cable from the system backplane for a rack-
mounted system
b) Route the cable over the side of the system and out of the way to provide clearance for removing
the backplane.
18. Remove the heat sink from the system processor module:
a) Loosen the heat sink actuation screw by turning the supplied hex key counterclockwise (A).
Loosen the screw until it moves freely. See the following figure.
50 Power Systems: System backplane
Advertisement
Table of Contents
