IBM Power Systems 9009-41A Manual page 127

Figure 112. Cable management arm parts
6. Reconnect the cable management arm by inserting the inner cable management arm tab (A) into the
inner mounting bracket (B) until it clicks into place. As you insert the tab, ensure the pin on the
support arm is positioned between the inner and outer arm.
7. Continue to push the system unit all the way into the rack until both release latches lock the system
into the operation position.
8. For a rack-mounted system, gently push the front cover (A) in until the cover snaps into place.
The cover has indentations where you can hold it more easily. Use the alignment pins (B) to secure
the cover to the system as shown in Figure 113 on page 114.
Removing and replacing the system backplane in the 9009-41A, 9009-42A, or 9223-42H 113