IBM Power Systems 9009-41A Manual page 62

System backplane
Hide thumbs Also See for Power Systems 9009-41A:
Table of Contents

Advertisement

Figure 45. Removing a fan from the system
16. Disconnect the control panel cable from the system backplane:
a) Unplug the control panel cable from the system backplane as shown in the following figure. As
you face the chassis, the connector is in the left front corner. You can pull the cable from the
system backplane by using the cable cover near the plug.
48 Power Systems: System backplane

Advertisement

Table of Contents
loading

This manual is also suitable for:

Power systems 9009-42aPower systems 9223-42h

Table of Contents