Deleting Pins - Simons Voss Technologies PinCode Keypad Manual

PinCode Keypad

4.3 Deleting PINs

(Manual)
IMPORTANT
Requirements for the User PIN
The User PIN must be secure. It must therefore meet the following require-
ments:
1. The User PIN must consist of four to eight characters.
2. The digits of the User PIN must not be consecutive.
3. The digits of the User PIN may not be identical.
4. The User PIN must not begin with 0.
5. The User PINs may not be identical.
PIN code keypad beeps and flashes green twice.
9
9 User PIN is programmed.
Repeat the process to programme other User PINs in the PIN code keypad.
Enter 1
(for user PIN 1)
You can delete a User PIN by setting the length of the User PIN to zero.
1. Enter the number sequence 0.
2. Enter the Master PIN.
3. Enter the number of the User PIN (for example, 1 for User PIN no. 1).
4. Specify the number that determines the length of the User PIN (0 in this
case).
PIN code keypad beeps and flashes green twice.
9
9 User PIN is deleted.
Enter 0
Enter the master PIN
Enter 2
(for user PIN 2)
Enter 4,5,6,7 or 8
(Length of the user PIN)
Enter XXXX
(New user PIN)
Enter 3
(for user PIN 3)
4. PINs
11 / 28