Table of Contents
Advertisement
PinCode Keypad
1.2 Safety instructions
(Manual)
The batteries used may pose a fire or burn hazard if handled incorrectly.
Do not recharge, open, heat or burn these batteries. Do not short-circuit!
Dispose of old or used batteries correctly. Store out of children's reach.
The electronics must not be subject to mechanical stress or damaged in
any way.
The product must not be soiled or scratched and must not be subjected
to strong impacts.
Only trained specialists may carry out installation and programming or
replace the batteries.
Access through a door may be blocked due to defective or incorrectly
programmed products. SimonsVoss Technologies GmbH is not liable
for any consequences, such as blocked access to injured persons or
those at risk, physical damage or any other losses.
The Master PIN is a central component of the safety concept of the PIN
code keypad. After a loss of the Master PIN, no more administrative
changes can be made to the PIN code keypad. Keep the Master PIN in a
safe place and make it possible to view the Master PIN at all times.
SimonsVoss Technologies GmbH accepts no liability for any damage
caused by incorrect fitting or installation.
Modifications or further technical developments cannot be excluded
and may be implemented without notice.
This documentation has been compiled based on the best knowledge
available to us. Nevertheless, errors cannot be ruled out. SimonsVoss
Technologies GmbH accepts no liability in such a case.
Should there be differences in the content of other language versions of
this documentation, the German version applies in cases of doubt.
1. General information
4 / 28
Advertisement
Table of Contents
Need help?
Do you have a question about the PinCode Keypad and is the answer not in the manual?
Questions and answers