Resetting Transponders - Simons Voss Technologies PinCode Keypad Manual

PinCode Keypad

5.3 Resetting transponders

(Manual)
9 The window "Read transponder data" opens.
Open the readout menu
(LSM software: "Read out transponder")
Enter user PIN
(is read out)
You can reset the integrated transponders at any time using the LSM
software.
1. Read out the transponder that you want to reset (see
transponders [ 15]
}
2. Enter the number sequence 00.
3. Enter the Master PIN.
4. Click on the Reset button.
The window "LockSysMgr" opens.
9
5. Click on the Yes button.
9 Window closes.
6. Enter the number of the User PIN (for example, 1 for User PIN no. 1).
PIN code keypad beeps and flashes green twice.
9
IMPORTANT
Radio error
If you hold the transponder too close to the programming device or activ-
ate the transponder too early, the radio link cannot be established.
1. Keep a distance of about 20 cm!
2. Do not activate the transponder until you are prompted in the LSM
software to press the transponder button.
The window "Programming" opens.
9
9 The transponder is reset.
).
5. Transponder
16 / 28
Reading out the