Pins; Changing Of The Master Pin - Simons Voss Technologies PinCode Keypad Manual

PinCode Keypad

4 PINs

4.1 Changing of the Master PIN

(Manual)
The PIN code keypad distinguishes between one Master PIN and up to
three User PINs. With the Master PIN it is possible to make changes to the
programming of the PIN code keypad, with the User PINs it is possible to
operate the assigned locking device.
IMPORTANT
Enter the numbers consecutively. The PIN code keypad only signals the
pressing of the keys, but not completion of the individual steps in the pro-
cess.
IMPORTANT
Cancellation of actions
All actions can be cancelled by not making any further inputs. The PIN code
keypad will cancel the action after a waiting period.
IMPORTANT
Battery warning locks programming
If one of the two battery warning levels is active, the programming cannot
be changed.
1. Replace the batteries (see
2. Change the programming as required.
The Master PIN is only used to change the programming on the PIN code
keypad. You cannot operate any locking devices with the Master PIN.
ATTENTION
Master PIN loss
The Master PIN is an essential, integral part of the PIN code keypad security
concept. No more administrative changes can be made to the PIN code
keypad if the Master PIN is lost.
1. Keep the Master PIN in a safe place.
2. Make the Master PIN visible at any time.
You only have to change the Master PIN during initial operation, after which
the change is optional.
1. Enter the number sequence 0000.
Battery replacement [
4. PINs
9 / 28
20] ).
}