Procedure; Deleting Pins; Description - Simons Voss Technologies TRA.PINCODE User Manual

Page 8
4.3

Procedure

Input "1
(for PIN 1)
5.0

Deleting PINs

5.1

Description

To deactivate a PIN, follow these steps:
1. Press "0" to change to programming mode.
2. Enter the "master PIN ".
3. Press
•
"1" for "PIN 1" or
•
"2" for "PIN 2" or
•
"3" for "PIN 3".
4. For the PIN length, enter "0".
5. If the input was correct, the PIN in question is deleted.
In this way, you can deactivate one or more PINs. They can only be reactivated if you
program them again. If you do not need all the PINs, you can leave one or two
unprogrammed.
Wireless Keypad: TRA.PINCODE
Input "0"
Input "master PIN"
Input "2"
(for PIN 2)
Input PIN length
4, 5, 6, 7 or 8
Input "PIN"
Input "3"
(for PIN 3)