Other Information - Simons Voss Technologies PinCode Keypad Manual

PinCode Keypad

8.2 Other information

(Manual)
IMPORTANT
Battery warning locks programming
If one of the two battery warning levels is active, the programming cannot
be changed.
1. Replace the batteries (see
2. Change the programming as required.
Activate double-click simulation
1. Enter the number sequence 000.
2. Enter the Master PIN.
3. Enter the number sequence 92.
PIN code keypad beeps and flashes green twice.
9
Double-click simulation is activated.
9
Deactivate double-click simulation
1. Enter the number sequence 000.
2. Enter the Master PIN.
3. Enter the number sequence 91.
PIN code keypad beeps and flashes green twice.
9
9 Double-click simulation is deactivated.
The following transponder functions are not available with the PIN code
keypad:
Quasiproximity

Validity mode

Expiry mode

Battery replacement [
8. Special functions
23 / 28
20] ).
}