System Setup - Compaq R12000 XR User Manual

LCD Configuration and Status

System Setup

Select System Setup from the Main Menu to enter the menu for changing system setup
options.
To change the system setup, you must enter the correct password. Use the Center and Enter
buttons to select the six digits for the password [0-9 and A-Z].
NOTE: The password must be six characters long. The default password is
change the password, see "Set Password," in this chapter.
1. Select the first digit using the Up and Down arrow keys on the Center button.
2. Press the Right arrow key on the Center button to move to the next digit.
3. To change a digit, use the Left arrow key on the Center button to go back.
4. After entering the entire password, press the Enter button.
IMPORTANT: Be sure to record your password. If you forget or lose your password, contact a
Compaq authorized service provider. After 30 minutes of no key presses, security is automatically
restored and the display changes to the main status display.
Communications Setup
Select Comm Setup from the System Setup menu to set up communications on the UPS.
Table 3-8: Communications Setup Choices
LCD Display
Comm Setup
Serial Port X
Comm Setup
Opt-Slot X
3-12
Main Menu
System Setup
Enter Password
COMPAQ
System Setup
Comm Setup
Explanation
Select the communication port to set up. X can be either 1 or 2.
Select the option slot to set up. X can be either 1 or 2.
Compaq Uninterruptible Power System R12000 XR User Guide
. To establish or
COMPAQ