Battery Data; Set Time; Set Date - Compaq R12000 XR User Manual

LCD Configuration and Status

Battery Data

Select Battery Data on the Main Menu to display the amount of charge on the battery in
10% increments.
When the UPS goes into Battery mode, the following LCD displays.
The remaining battery energy is shown, where the tag "1h=❚" means that each block
represents one hour. For example, this LCD shows three hours of remaining battery time.
Other possible tags are listed in Table 3-6.
Table 3-6: Possible Tags
Tag
1m
5m
10m
30m
1h

Set Time

Select Set Time from the Main Menu to set the correct time.

Set Date

Select Set Date from the Main Menu to set the correct date.
3-10
Main Menu
Battery Data
Battery Discharge
|❚❚❚ | 1h=❚
Time
1 minute per block
5 minutes per block
10 minutes per block
30 minutes per block
1 hour per block
Main Menu
Set Time
Main Menu
Set Date
Compaq Uninterruptible Power System R12000 XR User Guide