Front Panel LEDs
The front panel has five LEDs that indicate the status of the UPS.
Figure 2-3: Front panel LED display
LED
1
2
3
4
5
NOTE: The LED lights cycle when no electronics modules are installed and utility is present. In
Standby mode, there is no output but the batteries will be charging. The time required to reach Standby
mode can range from 45 seconds to several minutes, depending on the batteries' state of charge.
Compaq Uninterruptible Power System R12000 XR User Guide
Symbol
Color
Meaning
Green
Solid greenNormal operation
Rapidly flashing green—Ramp Up mode
Slowly flashing green Standby mode (batteries charging)
Amber
Solid amberOn Battery
Flashing amberBattery test in progress
Amber
Solid amberOn Bypass
Flashing amber—Bypass not available
Red
Solid redOne or more alarms may be present or active
Green
Solid greenN+1 mode (one or more redundant electronics
modules operating in system)
Flashing green—Battery self-test initiated
OffNon-redundant, not N+1 mode
1
2
3
4
5
Operation
2-3