Step/Direction With 5 V Signal Level (X5); Step/Direction With 24 V Signal Level (X3) - Beckhoff AX2070 Assembly, Installation, Setup

Electrical Installation
8.12.5.1

Step/Direction with 5 V signal level (X5)

This interface can be used to connect the servo amplifier to a stepper-motor controller with 5 V
signal level. The connector X5 must be used.
Frequency limit: 1.5 MHz
AGND and DGND (connector X3) must be joined together !
8.12.5.2

Step/Direction with 24 V signal level (X3)

This interface can be used to connect the servo amplifier to a stepper-motor controller with 24 V
signal level. The digital inputs DIGITAL-IN 1 and 2 at connector X3 must be used.
Frequency limit: 250 kHz
AGND and DGND (connector X3) must be joined together!
60
AX2040/2070
AX2040/2070
06/2007
AX2040/2070 Product Manual
BECKHOFF