Chapter 6: Using The Console Port; Using The Console Port In The Wireless Controller - Siemens SCALANCE WLC711 Maintenance Manual

6
Using the Console Port

Using the Console Port in the Wireless Controller

Using the Console Port in the Wireless Controller
Entering Rescue Mode on the Wireless Controller
To get into Rescue mode, you must connect your laptop to the controller's RS232 serial console port
via the Null Modem DB9 F- F (Female to Female) cable.
The serial port settings on the laptop should be the following:
•
Speed — 115200
•
Databits — 8
•
Parity — None
•
Stop Bits — 1
•
Flow Control — None
SCALANCE WLC711 Maintenance Guide 45