Deleting A Software Image; Downloading A New Software Image - Siemens SCALANCE WLC711 Maintenance Manual

4 To select an image to be the default image for a software upgrade, click it in the list, and then click
Set as default.
5 In the Upgrade Behavior section, select one of the following:
•
Upgrade when AP connects using settings from Controlled Upgrade – The Controlled Upgrade
tab is displayed. Controlled upgrade allows you to individually select and control the state of an
AP image upgrade: which APs to upgrade, when to upgrade, how to upgrade, and to which
image the upgrade or downgrade should be done. Administrators decide on the levels of
software releases that the equipment should be running.
•
Always upgrade AP to default image (overrides Controlled Upgrade settings) – Selected by
default. Allows for the selection of a default revision level (firmware image) for all APs in the
domain. As the AP registers with the controller, the firmware version is verified. If it does not
match the same value as defined for the default-image, the AP is automatically requested to
upgrade to the default-image.
6 To save your changes, click Save.

Deleting a Software Image

To Delete a Wireless AP Software Image:
1 From the top menu, click Wireless AP.
The Wireless AP Configuration screen is displayed.
2 From the left pane, click Global Settings > AP Maintenance.
The AP Software Maintenance tab is displayed.
3 In the AP Images for Platform drop-down list, click the appropriate platform.
4 In the AP Images list, click the image you want to delete.
5 Click Delete. The image is deleted.

Downloading a New Software Image

To Download a New Wireless AP Software Image:
1 From the top menu, click Wireless AP.
The Wireless AP Configuration screen is displayed.
2 From the left pane, click Global Settings > AP Maintenance.
The AP Software Maintenance tab is displayed.
SCALANCE WLC711 Maintenance Guide
Maintaining the Wireless AP Software
Deleting a Software Image
68