3 To specify which APs will be included, do one of the following:
•
Search for a specific AP by entering the AP in the search bar and clicking (
•
For a specific AP, select the corresponding checkbox.
•
For APs by category, click one of the Select APs options:
•
"---" option - Selected APs will be cleared from the AP Logs search.
•
Local APs - Select active or inactive local configured APs.
•
Foreign APs - Select active or inactive foreign configured APs.
4 To clear your AP selections, click Deselect All.
5 To set the frequency of the collection, under Times Per Day, select 1 (default), 2, 4, or 6 times per
day.
6 To set the destination of the AP logs, under Destination, select Local, Flash, or Remote.
7 Click Save.
Copying AP Logs
1
From the AP Log Management dialog, click Copy AP Logs to transfer locally collected logs. The
Copy AP Logs dialog is displayed.
2 Set the location of the AP Logs by selecting either Remote or Flash. The Flash button is disabled
when flash is not mounted.
3 When Remote is selected, do the following:
•
Under Protocol, select SCP or FTP to select the file transfer protocol you want to use to upload
the AP Log file.
•
Under Server, type the IP address of the server where the AP Logs will be uploaded.
•
Under User ID, enter the user ID used to log into the server.
•
Under Password, enter the corresponding password for the user ID.
•
Under Confirm, enter the corresponding password for the user ID to confirm it was typed
correctly.
•
Under Directory, enter the directory on the server where the AP Log file will be stored.
4 Click Copy to copy the logs.
SCALANCE WLC711 Maintenance Guide
Performing System Maintenance
Copying AP Logs
).
50