2 In the left pane, click Network > SNMP.
The SNMP Common Settings screen is displayed.
3 To enable SNMP, select the SNMPv3 Mode option.
4 Type the following information:
•
Contact Name – Specifies the name of the SNMP administrator.
•
Location – Specifies the location of the SNMP administration.
•
SNMP Trap Port – Specifies the destination port for SNMP traps. The industry standard is 162. If
left blank, no traps are generated.
5 In the Forward Traps drop-down list, click the security level of the traps to be forwarded:
Informational, Minor, Major, or Critical.
SCALANCE WLC711 Maintenance Guide
Using Controller Utilities
Enabling SNMPv3
60