Upgrading Using The Cli - Siemens SCALANCE WLC711 Maintenance Manual

2 From the left pane, click Administration > Software Maintenance.
The WLC Software tab is displayed.
3 In the Select upgrade list, click the software upgrade you want to delete.
4 Click Delete selected.
5 In the dialog box that is displayed, click OK to confirm the deletion of the upgrade. The Software
Maintenance window is displayed, providing the status and results of the deletion.

Upgrading Using the CLI

Note
The first step to upgrade the software is to backup the image of the existing software release. For more
information, see Backing Up and Restoring the Image
To Upgrade the Wireless Software Locally:
1 Use the
copy upgrade serveruser dir file [dest] [scp scp password]
download the software upgrade bundle from the remote FTP or SCP server.
•
If you want to download the file on the controller flash device, type flash for
copy upgrade server user dir file [
•
If you want to download the file on the controller local drive, leave out the [dest] option in the
copy upgrade server user dir file [
•
If you want to download the file from the SCP server, provide the corresponding SCP server,
user, dir and file appended with
•
If you want to download the file from the FTP server do not specify
end, where server, user, dir and file will specify FTP server parameters.
Example 1 – In the following example, the CLI command states that the upgrade file will be
downloaded from the FTP server to the flash card.
WLC.siemens.com# copy upgrade 192.168.4.10 test system/images/ AC-
MV-08.00.01.0003-1.
Example 2 – In the following example, the CLI command states that the upgrade file will be
downloaded from the FTP server to the controller local drive.
WLC.siemens.com# copy upgrade 192.168.4.10 test system/images/ AC-
MV-08.00.00.0123-1.
Example 3 – In the following example, the CLI command states that the upgrade file will be
downloaded from the SCP server to the flash card.
WLC.siemens.com# copy upgrade 192.168.4.10 test system/images AC-
MV-08.31.01.0200-1.
Example 4 – In the following example, the CLI command states that the upgrade file will be
downloaded from the SCP server to the controller local drive.
WLC.siemens.com# copy upgrade 192.168.4.10 test system/images AC-
MV-08.31.01.0200-1.
SCALANCE WLC711 Maintenance Guide
Upgrading the Wireless Convergence Software
on page 8.
] syntax.
dest
] syntax.
dest
scp password.
scp
vps
flash
vps
vps
flash scp TestPassword
vps
scp TestPassword
Upgrading Using the CLI
command to
option in the
dest
scp password at the
scp
38