Siemens SCALANCE WLC711 Maintenance Manual page 29

7 The Software Maintenance window is displayed, providing the status and results of the restore.
To Restore the Configuration Using the CLI:
8 Log into the CLI using SSH or console.
9 View all backup files in local storage by using the
WLC.siemens.com#show import
WLC
1: .03122009.071327.zip
10 Restore the configuration by using the
For example, to restore the backup file shown in the example under step 1:
WLC.siemens.com#import
To avoid typing the full name of the backup file, you can use the index number returned by the
show import command.
The restore can be run directly from an imported file stored on flash. In this case, the string "(flash)"
must be suffixed to the end of the specified file name.
WLC.siemens.com#import 1
The command will restore the controller configuration to the configuration in the backup file.
SCALANCE WLC711 Maintenance Guide
Backing Up and Restoring the Configuration
Restoring the Wireless Controller Configuration
show import
import filename|number
WLC
.03122009.071327.zip
command.
command.
29