Backing Up The Current Image From Rescue Mode - Siemens SCALANCE WLC711 Maintenance Manual

You can also specify the custom name for the backup image.
upgrade ac AC-MV-09.01.01.0123-1.
vps bckto flash Danube-
WLC-
vps-08.31.01.0192-rescue-user.tgz
4 If backing up the software to FTP, set up the FTP server credentials before running the upgrade by
running the
upgrade_backup_dest ftp server ip user password dir file
upgrade_backup_dest 192.168.4.10 test abc123 system/backups
WLC-
vps-08.31.01.0192-rescue-user.tgz
The name specified for "upgrade_backup_dest" is used as the backup file name.
5 Start the upgrade by running the
upgrade ac AC-MV-09.01.01.0123-1.
vps bckto ftp
The command first makes a backup image of the running system preserved on the FTP server, then
installs the selected upgrade image.

Backing Up the Current Image from Rescue Mode

You must follow the procedures in this section if you are backing up the current image.
You can also backup the current image via the Wireless Assistant GUI. For more information, see
Backing Up the Current Image During the Upgrade Process from the Wireless Assistant GUI
To Back Up the Existing Current Image:
1 Connect to the console port. Do not use the ESA ports or the Admin management port. For more
information, see
2 Reboot the system.The following menu appears during the reboot process.
-------------------------------------------------------------
Controller
Controller Rescue
-------------------------------------------------------------
3 Select Controller Rescue, and then press Enter. The first repairFS script runs after the OS
initialization.
Rescue Start-up Menu. Use with extreme caution.
1) Force System Recovery
2) Create System Backup Image
3) Display Backup Images
4) FTP Menu
5) Network Interface Menu
6) Manually run File System Check Utility (fsck)
7) Restore Backup Image directly from the FTP server
8) Authentication Service Management Menu
9) Flash Menu
R) Reboot
SCALANCE WLC711 Maintenance Guide
upgrade ac new-image-name bckto ftp
Using the Console Port on page 45.
Backing Up and Restoring the Image
Backing Up the Current Image from Rescue Mode
command.
command.
on page 9.
11