Technical Specifications - Rotronic RMS Wall mount Data Logger Instruction Manual

RMS-LOG Wireless / LAN Data Loggers
E-M-RMS-LOG-V1.4.docx
8

Technical Specifications

General
Device type
Measured parameters
IP protection class
Range of application
Storage and transport conditions
Data memory
Interfaces
Protocols
Wireless range
Transmitting power
Software compatibility
General
Device type
IP protection class
Range of application
Storage and transport conditions
Interfaces
Protocols
Power Supply
Supply voltage
7
IP65 protection is only fulfilled, when rubber plug is used for cabling.
8
IP65 protection is only fulfilled, when rubber plug is used for cabling.
9
Power supply requirements: 24 VDC ±10 % / >4 W / limited power source
 
© 2018 ROTRONIC AG Bassersdorf
RMS Data Logger
Humidity & temperature with HygroClip HCD-S
Differencial pressure with PCD-S
CO2 with CCD-S
7
IP65
-40..70 °C / 0..100 %RH
-40..30 °C / 0..90 %RH
44,000 pairs of measured values
Ethernet (RMS-LOG-L)
Wireless 868 MHz (RMS-LOG-868)
Wireless 915 MHz (RMS-LOG-915)
HTTP & MODBUS
20..50 m, indoors 868 MHz
14dBm (25mW)
≥V1.1
RMS Display
8
IP65
-20..30 °C / 0..100 %RH
-20..30 °C / 0..100 %RH
Ethernet (RMS-D-L)
HTTP
9
24 VDC ±10 % / <100 mA
PoE: 802.3af-2003, Class 1

Switzerland
Instruction Manual
15...25 m, indoors 915 MHz
2dBm (1,6mW)
≥V1.2.1
Page 30 of 35