Maintenance; Battery Replacement - Rotronic RMS Wall mount Data Logger Instruction Manual

RMS-LOG Wireless / LAN Data Loggers
E-M-RMS-LOG-V1.4.docx
6

Maintenance

Even the best technology needs regular maintenance. This chapter describes the most important points.
6.1

Battery Replacement

The batteries (see chapter 1.5.1 for the type of battery) of RMS devices typically last 3 years. The device shows
automatically when the battery needs to be replaced.

LED flashes red

System message in the RMS server software
The following steps are necessary to replace the battery:

Take the device out of the wall bracket

Remove the old battery and insert a new one
The time setting of the data logger is synchronized automatically after the battery replacement.
Important:

The battery life depends on the ambient temperature. Low or high temperatures can lead to a shorter
battery life.
 
© 2018 ROTRONIC AG Bassersdorf

Switzerland
Instruction Manual
Page 28 of 35