Table of Contents
Advertisement
www.raisecom.com
3.1 Device front panel description
8 SFP interfaces, 4 combo interfaces, 1 CONSOLE interface and dozens of status indicators are
placed on the front panel of ISCOM3012GF switch (see the figure below).
In the figure shown above:
① The logo and model of the switch are RAISECOM and ISCOM3012GF respectively.
② 3 device status indicators: SYS, PWR1 and PWR2.
Indicator
SYS
PWR1
PWR2
③ 12 Ethernet interfaces numbered 1 ~ 12. (9 ~ 12 are combo interfaces including both SFP and
④ 12 groups of indicators for the 12 SFP Ethernet interfaces (including 8 independent SFP and the
Indicator
Chapter 3 Device Appearance
3
Color
Green
Green
Green
RJ-45 interfaces).
4 SFP in the combo interfaces). There are 2 indicators of each SFP interface: LNK and ACT.
Color
4
Status
Description
Flickering
The system is operating in order.
Other
Software fault or the system is initializing
Status
after electrifying.
ON
The power supply module on the left is
electrified.
OFF
The power supply module on the left is not
electrified.
ON
The power supply module on the right is
electrified.
OFF
The power supply module on the right is not
electrified.
Status
Description
User Manual
1
5
6
3
5
2
Advertisement
Table of Contents
