If You Are Using Pc/Nfs; If You Canõt Print From Windows To An Lpt Port - Tektronix Phaser 360 User Manual

If you are using PC/NFS

If you can't print from Windows to an LPT port
If you have PC/NFS software installed on your computer, you need to make
the following selection in the Network Options dialog box:
From the Main window, double-click the Print Manager icon.
1.
From the Options menu in the Print Manager, select
2.
Network Settings.
In the Network Options dialog box, uncheck the
3.
Print Net Jobs Direct box.
Click OK.
4.
Windows 3.1
If your printer is connected through an LPT (parallel) port and your
document doesnÕt print, try the following:
In the Control Panel, double-click the Printers icon.
1.
In the Printers dialog box, choose your printer from the list of
2.
installed printers.
Click the Connect button; the Connect dialog box appears.
3.
Change your computerÕs port connection from LPTx to
4.
LPTx.DOS (where x is 1, 2, or 3).
Click OK.
5.
Note
Refer also to "Fixing timeout problems in Windows" on
page 8-28 for instructions on fixing timeout problems.
Troubleshooting
8-23
User Manual
8